Nebula Foam 2.0
Bi-use foam atomizer
- You will be able to choose between "manual winding" and "automatic air winding."
- Create a dense, sticky foam to perform proper pre-washing and washing of cars and motorcycles without the use of a Foam Gun;
- 3 different types of nozzles, green for dry foam, gray for intermediate foam, orange for wet foam;
If you want to perform a foam prewash to your car or motorcycle but don't have a professional pressure washer or can't get the thick foam from your foam gun, Nebula Foam 2.0 is the right accessory for you!
Nebula Foam 2.0 is a hand pump that creates a dense, adherent foam to carry out proper prewashing and washing of cars and motorcycles without the use of a Foam Gun. The product is designed and engineered for use with detergents with surface-active properties. In just a few steps you will perform a complete high-performance foaming prewash!
Nebula Foam 2.0 is a bi-use foam atomizer, this allows you to use the product in two different modes, you will be able to choose between "manual charge" and "automatic air charge"
Nebula Foam 2.0 is equipped with a compressed air connection, an inlet valve located in the pump head that allows air to enter the 2-liter bottle.
Thanks to the universal schrader valve, also used in vehicle tires, you will be able to have a pressurization of Nebula Foam 2.0 quickly and easily, thus saving time and effort. You will be able to use any type of compressor that is electric, battery-powered, or connectable to the car's cigarette lighter, such as the compressors given to some cars, to perform automatic air charging.
Why is it important to effectively prewash the car?
Ninety percent of the scratches found on the bodywork are caused by improper washing technique.
Therefore, before car washing with shampoo and glove or microfiber sponge, it is necessary to do a proper prewash. With Nebula Foam 2.0 it is possible, without the aid of a Foam Gun, to spray the specific foaming prewash product onto the vehicle you want to clean
Thanks to the compact foam created by Nebula Foam 2.0 increases the contact time between the chemical and the surface to be treated, in this way, the emollient capacities of the product will be able to act for a longer period of time on the surface, softening the dirt and redressing it later with the rinsing phase, guaranteeing a safe prewash.
Product Specifications:
- Usable capacity 1.25L
- Total tank capacity 2L
- Maximum pressure loading capacity - 3 bar
- Depressurizable safety valve
- Protective base against accidental impacts that also provides greater stability
- 2 Colored caps (Blue and Yellow) to identify the product contained in the tank
- Safety lock on the handle so as to prevent accidental spraying
- Semi-transparent reservoir with level indicator
- Three nozzles for creating three types of foam
- Wide opening for quick tank filling
- Easy to assemble and disassemble for tool-free cleaning and maintenance
- Innovative and ergonomic design
Nebula Foam 2.0 is equipped with three nozzles to produce three types of foam: wet, intermediate and dry.
Which nozzle to choose?
- Green nozzle: provides dry foam, suitable when you do not want to wet the surface to be cleaned.
- Gray nozzle: provides intermediate foam for all kinds of work, fitted as standard on Nebula Foam 2.0.
- Orange nozzle: provides wet foam and more coverage, suitable when you want to cover a large area.
Method of use with automatic air filling:
1) We recommend first diluting the product in the Mafra Graduated Bottle.
2) Unscrew the head of Nebula Foam 2.0, fill the tank to a maximum of 1.25 L and close by screwing the head all the way down
3) Unscrew the safety cap from the valve and connect the compressor
4) Inject air until the desired pressure is reached, maximum capacity 3 bar.
5) Make sure the safety lock on the handle is off before proceeding with spraying
6) When the job is done, activate the safety lock again and depressurize Nebula Foam 2.0 via the safety valve provided
Method of use with manual charge:
1) Dilute the product in the Mafra Graduated Bottle.
2) Unscrew the head of Nebula Foam 2.0, fill the tank to a maximum of 1.25 L and close by screwing the head all the way down
3) Pressurize Nebula Foam 2.0 by a series of pumping until the valve clicks.
4) Make sure the safety lock on the handle is off before proceeding with spraying
5) Proceed with spraying the product and repeat the pumping operation to compensate for the loss of pressure
6) When the job is done, activate the safety lock again and depressurize Nebula Foam 2.0 via the safety valve provided
